Comments on: Having Reliance Netconnect USB card to work on Linux http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/ Mon, 22 Mar 2010 07:15:22 +0000 http://wordpress.org/?v=2.9.2 hourly 1 By: amar http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/comment-page-1/#comment-39750 amar Fri, 12 Feb 2010 04:45:58 +0000 http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/#comment-39750 is anyone know how to cofigure reliance netconnector to CentOs is anyone know how to cofigure reliance netconnector to CentOs

]]> By: Pancham http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/comment-page-1/#comment-39146 Pancham Thu, 10 Dec 2009 07:31:05 +0000 http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/#comment-39146 after giving cat /proc/bus/usb/devices, we get the usb device recognised as follows, however, modprobe usbserial vendor=1d6b product=1412, result in no further results... can someone please help in getting this recognised??? T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev= 2.06 S: Manufacturer=Linux 2.6.25.5-slitaz uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.1 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=1412 Rev= 0.00 S: Manufacturer=HUAÿWEI TECHNOLOGIES S: Product=HUAWEI Mobile S: SerialNumber=ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev= 2.06 S: Manufacturer=Linux 2.6.25.5-slitaz uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev= 2.06 S: Manufacturer=Linux 2.6.25.5-slitaz ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:1d.7 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev= 2.06 S: Manufacturer=Linux 2.6.25.5-slitaz uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.1 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=1412 Rev= 0.00 S: Manufacturer=HUAÿWEI TECHNOLOGIES S: Product=HUAWEI Mobile S: SerialNumber=ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev= 2.06 S: Manufacturer=Linux 2.6.25.5-slitaz uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev= 2.06 S: Manufacturer=Linux 2.6.25.5-slitaz ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:1d.7 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms after giving cat /proc/bus/usb/devices,
we get the usb device recognised as follows,
however, modprobe usbserial vendor=1d6b product=1412,
result in no further results…

can someone please help in getting this recognised???

T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev= 2.06
S: Manufacturer=Linux 2.6.25.5-slitaz uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=1412 Rev= 0.00
S: Manufacturer=HUAÿWEI TECHNOLOGIES
S: Product=HUAWEI Mobile
S: SerialNumber=ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=88(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev= 2.06
S: Manufacturer=Linux 2.6.25.5-slitaz uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 2.06
S: Manufacturer=Linux 2.6.25.5-slitaz ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1d.7
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev= 2.06
S: Manufacturer=Linux 2.6.25.5-slitaz uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=1412 Rev= 0.00
S: Manufacturer=HUAÿWEI TECHNOLOGIES
S: Product=HUAWEI Mobile
S: SerialNumber=ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=88(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev= 2.06
S: Manufacturer=Linux 2.6.25.5-slitaz uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 2.06
S: Manufacturer=Linux 2.6.25.5-slitaz ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1d.7
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

]]> By: Hint of Sarcasm http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/comment-page-1/#comment-38840 Hint of Sarcasm Fri, 20 Nov 2009 13:47:02 +0000 http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/#comment-38840 [...] http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/ [...] [...] http://www.techbangalore.com/h.....-on-linux/ [...]

]]> By: satish http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/comment-page-1/#comment-38723 satish Sat, 14 Nov 2009 20:33:15 +0000 http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/#comment-38723 hi , i have fedora installed in my system.. i would like to install reliance net connect and i tried to install … its not detecting… what shall i do….? pls anyone get me out of this ? shall i follow the ubuntu method r what? my mail id is sbmp111@gmail.com hi , i have fedora installed in my system.. i would like to install reliance net connect and i tried to install … its not detecting…

what shall i do….?
pls anyone get me out of this ?

shall i follow the ubuntu method r what?

my mail id is sbmp111@gmail.com

]]> By: satish http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/comment-page-1/#comment-38721 satish Sat, 14 Nov 2009 20:32:38 +0000 http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/#comment-38721 hi , i have fedora installed in my system.. i would like to install reliance net connect and i tried to install ... its not detecting... what shall i do....? pls anyone get me out of this ? shall i follow the ubuntu method r what? my mail id is sbmp111@gmail.com hi , i have fedora installed in my system.. i would like to install reliance net connect and i tried to install … its not detecting…

what shall i do….?
pls anyone get me out of this ?

shall i follow the ubuntu method r what?

my mail id is sbmp111@gmail.com

]]> By: Mohan Reddy http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/comment-page-1/#comment-38563 Mohan Reddy Wed, 28 Oct 2009 06:05:51 +0000 http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/#comment-38563 Hi, I am Mohan Reddy, i recently bought Reliance Netconnect USB drive. it is working fine in windows OS. but i am unable to install this in Enterprise Linux.i tried all the all the above steps. my USB drive is ZTE-AC2726 model. Vendor is ZTE.my vendor id :12d2 product id is :fff5. i am getting error at # modprobe usbserial vendor=0?12d1 product=0?1001 step. Please advice. Thank You, Mohan Reddy smohan37@gmail.com. Hi,
I am Mohan Reddy, i recently bought Reliance Netconnect USB drive. it is working fine in windows OS. but i am unable to install this in Enterprise Linux.i tried all the all the above steps. my USB drive is ZTE-AC2726 model. Vendor is ZTE.my vendor id :12d2 product id is :fff5.

i am getting error at # modprobe usbserial vendor=0?12d1 product=0?1001 step.

Please advice.

Thank You,
Mohan Reddy
smohan37@gmail.com.

]]> By: dumbo http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/comment-page-1/#comment-38033 dumbo Mon, 17 Aug 2009 20:15:55 +0000 http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/#comment-38033 I was able to get the Reliance netconnect huawei EC1260 to work on my debian linux. modprobe was not detecting a modem, so I did this: usb_modeswitch -v 0x12d1 -p 0x140b -d 1 usb_modeswitch -v 0x12d1 -p 0x140b -H 1 modprobe usbserial vendor=0x12d1 product=0x140b Now edit /etc/wvdial.conf [Dialer Defaults] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Modem Type = USB Modem Baud = 460800 New PPPD = yes Modem = /dev/ttyUSB2 ISDN = 0 Phone = #777 Password = Username = stupid mode = 1 execute wvdial I needed to repeat all steps (except editing the conf file) each time I booted up. So, I made a bat file. All I do now is double click on it after physically connecting the device. Best of luck ;-) I was able to get the Reliance netconnect huawei EC1260 to work on my debian linux. modprobe was not detecting a modem, so I did this:

usb_modeswitch -v 0×12d1 -p 0×140b -d 1
usb_modeswitch -v 0×12d1 -p 0×140b -H 1
modprobe usbserial vendor=0×12d1 product=0×140b

Now edit /etc/wvdial.conf

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = USB Modem
Baud = 460800
New PPPD = yes
Modem = /dev/ttyUSB2
ISDN = 0
Phone = #777
Password =
Username =
stupid mode = 1

execute wvdial

I needed to repeat all steps (except editing the conf file) each time I booted up. So, I made a bat file. All I do now is double click on it after physically connecting the device.

Best of luck ;-)

]]> By: Amit http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/comment-page-1/#comment-37942 Amit Fri, 17 Jul 2009 11:39:14 +0000 http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/#comment-37942 hi , I tried to connect my reliance netconnect using the method described here .. there is a slight problem however ..when I did modprobe with vendor and product ID although it says new interface driver registered for usbserial ...i don't get any converter detected and their is no device ttyUSBx hi ,
I tried to connect my reliance netconnect using the method described here .. there is a slight problem however ..when I did modprobe with vendor and product ID although it says new interface driver registered for usbserial …i don’t get any converter detected and their is no device ttyUSBx

]]> By: Naveen http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/comment-page-1/#comment-37917 Naveen Fri, 10 Jul 2009 15:31:29 +0000 http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/#comment-37917 i am also one of the victim of the reliance netconnect i bought the connection at december and i closed the connection on janauary but he never stopped me sending me bill i went to the reliance world again and again but there was just a consolidated response they say "dont worry" its not a problem we will do it right. finally i got a notice from court to be present before lokadalath i was shocked then i again went to the reliance world the answer was the same finally i have to pay 3000/ rs without any mistake of mine. there are 1000s of people who daily come to the lok adalath daily all are reliance company victims. The reliance is the biggest frauds i have paid 3000/ rs without any reason the actual fault was the companies but i was the victim. how do you think that they have the crores this is the reason. Never go to any reliance postpaid or prepaid products. this is a kind request to all indians never buy these frauds products. i am also one of the victim of the reliance netconnect i bought the connection at december and i closed the connection on janauary but he never stopped me sending me bill i went to the reliance world again and again but there was just a consolidated response they say “dont worry” its not a problem we will do it right.
finally i got a notice from court to be present before lokadalath i was shocked then i again went to the reliance world the answer was the same finally i have to pay 3000/ rs without any mistake of mine. there are 1000s of people who daily come to the lok adalath daily all are reliance company victims.
The reliance is the biggest frauds i have paid 3000/ rs without any reason the actual fault was the companies but i was the victim.
how do you think that they have the crores this is the reason. Never go to any reliance postpaid or prepaid products. this is a kind request to all indians never buy these frauds products.

]]> By: sarvesh http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/comment-page-1/#comment-37807 sarvesh Mon, 01 Jun 2009 07:14:24 +0000 http://www.techbangalore.com/having-reliance-netconnect-usb-card-to-work-on-linux/#comment-37807 i have redhat 5 certified operating system fresh install machine(dual booting linux & window 2003).when i connect the reliance broadband data card and want to install then it do not install. Please help me how can i install my broandband data card. i have redhat 5 certified operating system fresh install machine(dual booting linux & window 2003).when i connect the reliance broadband data card and want to install then it do not install. Please help me how can i install my broandband data card.

]]>